The Bomar Proline 520.450 ANC is an automatic horizontal twin-column bandsaw ideal for the cutting of section material. The feed length is 600 mm, with a total multi feed up to 9999 mm. This machine features variable blade speed from 20~120m/min.

• Twin column design; heavy duty construction, bow running on linear bearings
• Controls; machine functions housed in separate moveable console, fault diagnosis, machine status reports displayed on large LCD.
• Feed length 600 mm, total multi feed up to 9999 mm
• Split front vice for short residual lengths and an ideal material clamping
• Variable blade speed by frequency inverter from 20 to 120 m/min
• Downfeed; automatic regulation of saw bow descent responding to variable material mass
• 70mm minimum bar end rest piece

Bomar Proline ANC Technical Details

Synchronisation
Powered swarf brush always runs synchronised to the saw blade speed.

Precise and stable
The saw frame is mounted to high-precision, play-free linear guides. These guides guarantee maximally smooth operation and cutting precision.

Precision
Large tungsten carbide pads fitted to vibration-damping cast material and low-wear rollers guide the blade perfectly for precise and accurate cuts.

Full length cylinders
Generously sized full stroke cylinders allow the vice clamping and unclamping operation from the control panel. Split vice to clamp material both sides of the cuts.

Saw band tensioner
Standard equipment includes a hydraulic band tension display, an electronic monitor for saw blade tension and saw band breakage.

AFDR (Automatic Down Feed Regulation)
Cutting feed and cutting pressure are set individually at the control panel. The selected cutting pressure is displayed on a gauge.

The ADFR system regulates the cutting pressure and the cutting feed rate automatically in real time. A sensor gives the current load on the blade and regulates the cutting feed according to the shape and cross section of the material. For larger cross cuts, the cutting channel lengthens and the saw band's load increases which activates the ADFR valves to reduce the downfeed rate automatically. If the cutting feed in these ranges is not automatically adjusted, blade life drastically decreases and/or accuracy is lost!